Pimax Dream Air review
My dream PC VR headset
Save 2% on the Dream Air by buying via this link and entering the code “techytalk”: https://store.pimax.com/products/pimax-dream-air?ref=techytalk
Intro
If I asked you to describe the perfect VR headset that you could hope to buy, based on current technology, I’m guessing you’d probably say that you want it to be super light, have really high resolution displays, to use OLED panels for ultra high contrast, to have built in speakers, so you don’t always have to wear headphones, to have inside out tracking so you don’t need base stations, and that it would work wirelessly completely on its own, without the need for a computer. Well, the Pimax Dream Air doesn’t quite manage to tick all six of those boxes, but five out of six isn’t bad.
So, wireless, this thing isn’t, and unlike standalone headsets, such as the Meta Quest 3 or upcoming Steam Frame, you will need a powerful PC to get it up and running. But if you’re looking for the ultimate PC VR headset right now, the Dream Air can make a strong claim to being it. It’s far smaller and lighter than most, it has very high resolution displays, it uses OLED panels, it’s available in SLAM version that doesn’t need base stations and, unlike the Bigscreen Beyond, for instance, it includes speakers, so it’s a truly all in one solution.
However, it is very expensive and, having tested it for a couple of months, I can tell you it very definitely is not perfect, even if it’s probably still the most desirable VR headset around right now.
Specs and image quality
Looking more closely at those specs, this thing is an absolute powerhouse. Its OLED panels pack in 3840 x 3552 pixels per eye, which is slightly less than the company’s Crystal Super headset, which has 3840 x 3840 pixels per eye, but it’s far more than then 2560 x 2560 pixels of its biggest slim and light competitor the Bigscreen Beyond 2 or the mere 2,064 x 2,208 pixels of the Meta Quest 3. Even Valve’s upcoming Steam Frame only has 2160 x 2160 pixels per eye.
What’s more, with these panels being OLED, they offer incredible contrast. Pimax doesn’t actually state brightness or contrast figures, but blacks are truly black, rather than the slightly washed out gray of the LCD displays typically used in cheaper VR headsets, and just generally this thing offers incredible visuals. Crucially, it’s the combination of the vividness of the colors it produces, those incredible blacks levels, its high brightness, and the sharpness of these panels that really wows you. Many previous OLED VR headsets have had resolutions low enough that there’s quite obvious gaps visible between pixels, creating the so called screen door effect. However, here that affect is almost completely gone.
There are a handful of other top tier VR headsets I’ve not tried, but of those I have, the Dream Air is hands down the best overall. That said, its field of view isn’t particularly wide. Testing with WIMFOV, it registered just 86° horizontal and 82° vertically.
Comfort and ergonomics
However, this brings us to one of the key sticking points of this headset, which is its default facial gasket. I’ll cover comfort more in a moment, but just in terms of visuals, this gasket feels like it holds your head just that little bit too far away from the lenses. If I really push the headset onto my face, the field of view opens up, to 102° horizontal and 90° vertical. What’s more, overall clarity and general eye strain improves too. However, this is clearly not a practical way to use a VR headset.
You can fit other gaskets that greatly improve this, as demonstrated here by VR Flight Sim Guy, but for the default one to be so bad is, frankly, unacceptable on a headset this expensive.
Moving on to comfort, and the annoyance doesn’t stop, unfortunately. For a start, a minor consideration is that this headset, at least with its default gasket, simply doesn’t have any room to be used with glasses. You absolutely will have to buy custom prescription lenses, which isn’t the case with many larger headsets.
Even with custom lenses fitted, though, that gasket is poor when it comes to comfort. There simply isn’t enough padded area and depth of padding to really spread the force of the headset on your face. Supposedly Pimax will be making a new version, and you can buy or 3D print your own alternatives, but, again, there’s no excuse for it being this bad out of the box.
Otherwise, comfort is as mostly as good as you’d expect for a headset that’s this light. At 170g, it’s not as light as the Bigscreen Beyond 2, but it’s still half the weight of cheap entry level headsets like the Meta Quest 3, and fully a quarter of the weight of the Pimax Crystal Super, for instance.
That means that you can just about get away with using the headset with its simple included strap, or at least you should be able to once you get a comfortable face gasket. That said, I can see many people wanting to upgrade to a strap with over head support, particularly if you’re into doing long sim races or flights.
Along with the poor face gasket, there are some other ergonomics issues with this headset. For a start, having the cable protrude from both arms makes it awkward to put on. Plus, the junction box here gets suprisingly warm so can be disconcerting to have resting on your neck. Again, a custom solution like the one VR Flight Sim Guy has put together would probably be what I’d end up doing were I to keep this headset long term, but sadly this is just a loan headset from Pimax so I haven’t invested the time and money in those extras.
Also slightly awkward is just getting this headset on. Because the arms don’t pivot and the default straps don’t really have any stretch, you can’t just plant the headset on your face than pull down the strap and tighten it like with other headsets. Instead, you have to hold it at an angle, pushing the bottom of the headset onto your cheeks, then pull the straps down. And if you’ve made the straps too short, you’ll need to take the headset off, loosen them then try again.
Tracking and SLAM/external versions
Crucially, though, once you are setup and have got a comfortable gasket, this headset really does deliver the full experience, unlike, say the Bigscreen Beyond 2. While that headset is lighter than this one, and has its clever custom 3D printed gasket to fit your face, it doesn’t have speakers built into the arms and is only available in a version that requires you to use external tracking base stations.
Pimax does offer the Dream Air in an external tracking version, but it also has an internal tracking SLAM version, the latter of which comes with controllers. Buy that unit and you’re completely ready to go with no extras required.
Unfortunately, Pimax actually sent me the external tracking version, and only sent me one base station to test it with, which means that while the headset can track its position, I can’t use controllers with it, as these need at least one more base station to be tracked as well. This still allowed me to play flight and racing sims, watch VR video, and generally get a sense of the visuals that this device can deliver, but it’s a great example of the limitations of external tracking, especially given noone actually really makes base stations anymore.
Pimax software
To get up and running, you have to have Pimax’s software running in the background, which is a little bit annoying, especially as it often loses your tracking status, requiring a fresh room setup each time you don your headset. However, it does at least offer a comprehensive range of customisation options, including IPD adjustment, render resolution and the ability to turn on or off foveated rendering. That’s where the headset will get games to render only at the highest detail in the center of the image, which can boost frame rate without meaningfully impacting on noticeable image quality.
Frame rate and performance
Talking of frame rate, you’re going to need a powerful PC to get the most from this headset. I’m running an RTX 5080, and my system regularly crashed when trying to run games at native resolution without foveated rendering and when using high in-game detail settings. However, once setup with slightly scaled back rendering and sensible in-game settings, such a system will get smooth frame rates with incredible visuals. Pimax recommends the RTX 3070 and higher for use with this headset, but I’d suggest you realistically want to have at least an RTX 4070 Ti Super to get the most from it.
Verdict
Overall then, the Dream Air is very close to perfection. It has the visuals, core hardware, and lightweight design to truly make it the ultimate PC VR headset. However, the fact that you’ll almost certainly have to buy or 3D print a new face gasket, that you’ll likely want to buy a new strap, and even then you’ll still have to navigate slightly the clunky ergonomics of the twin cables and fixed strap arms is a really tough pill to swallow for a headset that costs $2,000 without controllers, and $2,300 for the SLAM version with controllers.
Still, if it’s any consolation, I can offer a 2% saving on that price, if you buy direct from Pimax. Just use the link and code in the description to take advantage of that offer. Hopefully, Pimax will deliver on its promise of a new gasket in the coming months, fixing a decent number of the issues I’ve highlighted, but until it actually delivers on that promise, just be aware of its limitations.