VR Rock Pimax Dream Air prescription lens review

Clearly layered

Explore the Pimax lineup (affiliate): https://store.pimax.com/?ref=techytalk

There are many reasons why the Pimax Dream Air could be considered the best VR headset  you can buy right now, but one aspect that holds it back for many users including myself is the fact that that you can’t wear glasses with it. There simply isn’t enough room inside its face gasket to fit a conventional pair of glasses or even a modified pair of glasses with the arms removed and the frame cut down, as I’ve resorted to with some other headsets. As such custom prescription lenses are effectively a must buy.

Pimax sells its own custom lenses but these are limited to only spherical correction, and only for between minus one to minus 6 dioptre. So, if like me you have a stronger prescription or have an astigmatism you’ll need to look at other options.

Thankfully there are multiple manufacturers out there that make a range of custom prescription lenses for VR headsets, including the likes of VR wave, vr pro optics, and honsvr. However, the ones I opted for are made by VR Rock. Not only were these among the most competitively priced options I could find when I bought them, but VR Rock is one of the few companies that actually makes lenses for the dream air. What’s more, they support a wide range of prescription types from -20 to +12 spherical, -10 to +1 cylindrical, and single degree axis selection.

At $89 a pair when I bought them, they were, as I say, the cheapest I could find at the time, though they seem to have gone up to $109 now, which is more in line with the price of alternatives. Either way, it’s certainly enough to be a significant consideration when larger headsets can simply be used with normal glasses. But, for the sake of such a small and light headset, it’s not too bad an extra cost.

The lenses also come with free anti-fog, oil resistance, scratch resistance, easy to clean, and radiation resistance coatings, but you’ll have to pay an extra five bucks each for blue light filter and anti glare coatings.

Delivery time was a little on the slow side, as it took about a month for these to arrive, but that may vary depending on where you are in the world and possibly on your prescription. For reference, my prescription is around +4 spherical in both eyes, -2.5 cylindrical in both eyes, and around  90 degrees axis in both eyes.

The lenses arrived in this box, with each lens held in its own little paper bag and a carry case provided for later storage. Incidentally, this is exactly the same case that VR Wave uses for its Steam Frame lenses – I’ll have a review of those up very soon.

So to the lens themselves, and the first thing I noticed about them is that their frames are very obviously filament 3D printed, as opposed to resin 3D printed or injection moulded. That means there are quite obvious layer lines in them, which in turn has implications for the accuracy of their fit. These lenses do attach magnetically, but they also rely on a close tolerance fit to stay flat and secure, and, annoyingly, that’s an area they somewhat fall down on.

Fitting the lenses is easy enough, with the magnets mostly pulling the lens into alignment. But at this point they’re still quite loose and not optically in the right position. Instead you need to jostle them around a bit to find the right spot where they then press into place a little further. Once seated properly, they’ll resist light knocks, but I’ve generally found they can be nudged loose fairly easily. It’s particularly an issue with the default head strap, as you have to force the face gasket on at an angle, rather than placing it straight onto your face, which can mean your nose and cheeks push into this area, squeezing the lenses and popping them out of place. Similarly, pushing the headset upwards to check on the world around you can interfere with them.

Removing the face gasket also tends to knock the tabs at the top of the lenses that indicate which is left and which is right. Obviously, you don’t remove the face gasket that often but if you’re swapping the gasket or cleaning the headset or lenses, you do have to be careful not to send the lenses flying. Just shaving a millimeter or two off the top of these tabs I think would help a great deal.

Mostly, though, I can’t help but think that a more finer grained, accurate 3D print as used on these VR Wave lenses would make for a more secure fit.

Thankfully once the headset on I’ve had no issues with the lenses falling out mid game.

Optically then these lenses are pretty spot on. My vision is clear, properly corrected, and the lenses don’t seem to affect the fov or overall usability of the headset. My eyebrows occasionally brush against those top tabs, but the lenses don’t otherwise get too close to my eyes. Occasionally I sort of get the impression my vision isn’t quite as sharp as it could be with a really good pair of glasses, but it’s absolutely close enough to be usable

However one thing I did find is that, as someone that’s getting on a bit in years, and is just at the point of starting to need reading glasses, I probably could have done with adding a slight boost to my spherical correction just to boost the clarity of near objects in VR but this will vary depending on types of games you play and your vision overall.

Overall then these were effectively an essential purchase for me and, while I’m a bit disappointed in the quality of the 3D print, they have done the job and were the cheapest options available at the time. That said, the difference in price was only around 10 to 20 dollars, I think, so if other manufacturers use a finer grade of 3D print I probably would spend the extra next time. But, I haven’t tested any alternatives yet so can’t say for certain which, if any, are better.

Lenses aside, if you are interested in buying the Dream Air or any other Pimax headset, Pimax is currently offering a Black Friday price guarantee, which means if you buy now (via this link) but then the headset turns out to be cheaper in the Black Friday sale, you can claim the difference back, which is kind of cool. There’s a link in the description with the full details. Also, while this video isn’t sponsored or anything, I do have an affiliate partnership with Pimax, so if you buy via the link below and enter the code “techytalk” at checkout you can save 2% on the list price.

So that’s it from me, but have you used any custom prescription lenses for your VR headset? If so, I’d be interested to hear from you in the comments to know how you got on with them, and if there are any ones that you’d recommend

Add a Comment

Your email address will not be published. Required fields are marked *